Show Trace Authdebug - Allied Telesis SwitchBlade x3100 Series Manual

Configuring Port Authentication

SHOW TRACE AUTHDEBUG

Syntax
SHOW TRACE AUTHDEBUG [INTERFACE={type:id-range|id-range|ifname-
list|ALL}] [EVENT={{EAPOL|AUTHSERVER|ACCT} [,...]|ALL}]
Shows which message types are currently being traced over specified interfaces
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
EVENT
[ ,... ]
SHOW TRACE AUTHDEBUG
--- Auth Debug Message Trace ---
Interface Event
--------- --------------------------------------------------------
ETH:11.19 EAPOL,AUTHSERVER,ACCT
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The ethernet interfaces over which the trace types will
be shown.
Specifies the type of Port Authentication trace to add:
EAPOL - The EAP messages sent and received between
the supplicant and the authenticator (SBx3112).
AUTHSERVER - The Authorization RADIUS packets
sent and received between the RADIUS server and the
authenticator (SBx3112).
ACCT - The accounting messages processed by the
RADIUS server.
ALL - All types of traces are included.
Any combination of the Event types can be inserted
here, separated by a comma.
Introduction
Default Value
ALL
6-133