Set Dhcprelay - Allied Telesis SwitchBlade x3100 Series Manual

Configuring DHCP Relay

SET DHCPRELAY

Syntax
SET DHCPRELAY={ dhcpname-list | MAIN | ALL } [ AGENT REMOTEID={
remote-id | SHELFID | IFDESCRIPTION | IFREMOTEID | DEFAULT } ] [
SHELFID={ shelf-id | DEFAULT } ] [ MODE={ RELAY | SNOOPING } ] [
CIDFORMAT={ AUTO | TR101DEFAULT } ]
Changes attributes of the specified DHCP Relay. CIDFORMAT allows adding an interface
Description
description to sub-option 9. The attributes are defined in the CREATE DCHPRELAY
command.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
DHCPRELAY
AGENT
REMOTEID
SHELFID
MODE
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
ALL - all DHCP instances
remote-id - the DHCP Relay agent's remote ID, which is
used DHCP servers to identify the relay agent.
SHELFID - the shelf identifier for the DHCP relay agent.
IFDESCRIPTION - interface description
IFREMOTEID - interface remote ID
DEFAULT - Shelf MAC
shelf-id - the shelf identifier for the DHCP relay agent.; a
user-specified alphanumeric string between 1-30 charac-
ters with no spaces.
DEFAULT - the MAC address for the system on which
the DHCP relay agent is configured
RELAY - indicates the relay agent is in relay mode
SNOOPING - indicates the relay agent is in snooping
mode; the relay agent updates the option 82 portion of
client messages without forwarding to DHCP servers
Introduction
Default Value
N/A
N/A
N/A
N/A
7-39