Show Interface - Allied Telesis SwitchBlade x3100 Series Manual

Example Output

SHOW INTERFACE

Syntax
SHOW INTERFACE [ ={ type: | type:id-range | id-range | ifname-list
| ALL } ] [ CARD=slot-list ] [ STATE={ UP | DOWN | ALL } ]
[ DIRECTION={ NETWORK | CUSTOMER | INTERNAL } ]
[ DESCRIPTION ] [ FULL ]
Displays information about interfaces in the system. Information provided includes inter-
Description
face type, interface ID, interface name, physical ports associated with the interface, inter-
face direction, interface mode (UP or DOWN) and the last change time (based on the
system uptime).
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
CARD
STATE
DIRECTION
DESCRIP-
TION
FULL
Example
E135 - manager SEC>> SHOW INTERFACE CARD=1
--- GE Interfaces ---
Software Reference for SwitchBlade x3100 Series Switches (Interface Management)
Description
The interfaces that will have information displayed.
The slot number for the card interfaces to display.
The state of the interfaces:
- UP - Operationally UP
- DOWN- Operationally DOWN (The Admin state can
be UP or DOWN).
- ALL - Both UP and DOWN
NETWORK - The interface is toward another system,
and so data packets from multiple customers are carried
over the link.
CUSTOMER - The interface is toward a customer site
and all data streams are associated with the customer.
Includes the DESCRIPTION value for the displayed
interfaces.
Gives complete information for each interface type
GE Interfaces
Default Value
ALL
2-19