Allied Telesis SwitchBlade x3100 Series Manual page 417

Configuring BPDU Cop
ADD STP INSTANCE VLAN
For MSTP. By default, all VLANs (and therefore all ports), belong to the Common STP
Description
instance, the CIST. Once created, VLANs can be associated with the MSTI using this
command: (VLANs can also be dis-associated with the MSTI as well.) The user can con-
tinue to associate VLANs with MSTIs until there are no VLANs associated with the CIST.
Syntax
ADD STP INSTANCE={ stpname | mstid } VLAN={ vlanname | vid-range }
The following table gives the range of values for each option that can be specified with
Options
this command and a Default Value (if applicable).
Option
INSTANCE
VLAN
Example
ADD STP INSTANCE=mst9 VLAN=420
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The name of the Multiple Spanning Tree instance
(MSTI) to create
The name or numerical VLAN identifier.
Introduction
Default Value
1-4094
4-97