Allied Telesis SwitchBlade x3100 Series Manual page 627

Configuring the Egress Port Rate Limiting
SHOW EGRESSLIMITER
Syntax
SHOW EGRESSLIMITER [ ={ limitername-list | ALL } ] [ INTERFACE={
type:id-range | id-range | ifname-list | ALL } ]
Shows information about EGRESSLIMITERs in the system, and optionally their association
Description
to interfaces. See CREATE EGRESSLIMITER for discussion of the use of EGRESSLMITERs
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
EGRESSLIM-
ITER
INTERFACE
Example
SHOW EGRESSLIMITER
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The name of the EGRESSLIMITER that has already been
created.
The interface(s) to be displayed for EGRESSLIMITERs
Introduction
Default Value
ALL
6-67