Allied Telesis SwitchBlade x3100 Series Manual page 711

Configuring SSH
SHOW SSH SERVER (SEC)
Syntax
SHOW SSH SERVER [ COUNTERS ]
Displays the SSH configuration and status of the SSH server. If the COUNTERS option is
Description
used, a list of the SSH-specific counters and their value is also displayed
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
COUNTERS
Example
SHOW SSH SERVER COUNTERS
--- Secure Shell Configuration ------------------------------------------------
SSH Version.......................... SSH-2
Server Enabled....................... No
Port................................. 22
Host Key ID.......................... None
Host Key Length (bits)............... Unknown
Login Timeout (seconds).............. 600
Allowed Authentications.............. password
Required Authentications............. password
Secure Shell Counters
inOctets................. 0
RxPkts................... 0
Receive Counters...............
RxSSHMsgDisconnect............ 0
RxSSHMsgIgnore................ 0
RxSSHMsgUnimplemented......... 0
RxSSHMsgDebug................. 0
RxSSHMsgServiceRequest........ 0
RxSSHMsgServiceAccept......... 0
RxSSHMsgKexInit............... 0
RxSSHMsgNewKeys............... 0
RxSSHMsgKexDhInit............. 0
RxSSHMsgKexDhReply............ 0
RxSSHMsgUserAuthRequest....... 0
RxSSHMsgUserAuthFailure....... 0
RxSSHMsgUserAuthSuccess....... 0
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
Displays a list of the SSH-specific counters and their val-
ues.
outOctets................. 0
TxPkts.................... 0
Transmit Counters...............
TxSSHMsgDisconnect............. 0
TxSSHMsgIgnore................. 0
TxSSHMsgUnimplemented.......... 0
TxSSHMsgDebug.................. 0
TxSSHMsgServiceRequest......... 0
TxSSHMsgServiceAccept.......... 0
TxSSHMsgKexInit................ 0
TxSSHMsgNewKeys................ 0
TxSSHMsgKexDhInit.............. 0
TxSSHMsgKexDhReply............. 0
TxSSHMsgUserAuthRequest........ 0
TxSSHMsgUserAuthFailure........ 0
TxSSHMsgUserAuthSuccess........ 0
Introduction
Default Value
6-151