Allied Telesis SwitchBlade x3100 Series Manual page 479

EPSR and (R)STP Interaction
ENABLE EPSR
Used to enable the EPSR domain. Before any EPSR domain can be enabled, the Control
Description
Vlan, Primary and Secondary interfaces should have been provisioned on that EPSR
domain.
Syntax
ENABLE EPSR={ epsrdomain-list | ALL }
The following table gives the range of values for each option that can be specified with
Options
this command and a Default Value (if applicable).
Option
EPSR
Example
ENABLE EPSR=allied-1,allied-2
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The name(s) that has been given to the EPSR
domain(s)
Introduction
Default Value
NA
4-159