Allied Telesis SwitchBlade x3100 Series Manual page 544

Introduction
ADD IGMPSNOOPING FLOODING
Syntax
ADD IGMPSNOOPING FLOODING
{ ALLSTANDARD | DVMRP | OSPFALL | OSPFDESIGNATED | RIP2 | IGRP |
DHCPRELAY | PIM | RSVP | CBT | VRRP | DXCLUSTER | CISCONHAP | HSRP
| MDNS | CUSTOM=groupname GROUPADDRESS=ipaddress }
{ VID=vid-list }
Used to provision the reserved multicast IP addresses in the system, so that the provi-
Description
sioned addresses can be forwarded instead of being dropped.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FLOODING
VID
Example
ADD IGMPSNOOPING FLOODING=ALLSTANDARD VID=401,402
5-12
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
Description
The types of reserved mulitcast addresses.
ALLSTANDARD - All standard reserved mulitcast
addresses (DVMRP, OSPF All Routers, OSPF Desig-
nated Routers, RIP2, IGRP, DHCP RELAY, PIM, RSVP,
CBT, VRRP, DxCLUSTER, CISCONHAP, HSRP, and
MDNS.)
CUSTOM - Any unique name provided by the user for a
reserved multicast IP address other than the standard
reserved multicast IP addresses.
GROUPADDRESS - IP address of the reserved multi-
cast address being added by the user.
The VLAN list where this configuration will apply.
Configuring IGMP
Default Value
ALL