Allied Telesis SwitchBlade x3100 Series Manual page 361

Configuring LAG
SET SWITCH HASH SELECT
Syntax
SET SWITCH HASH
SELECT={ MAC | IP | MACANDIP | IPANDPORT | ALL }
This command applies to the SBx3112, and controls the global hash selection setting. The
Description
SHOW SWITCH
ting, and the
current hash selection setting.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
SELECT
Example
SET SWITCH HASH SELECT=MAC
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
command includes a new field to display the current hash selection set-
SHOW LAG command uses the existing "Select Criteria" field to show the
Description
Refer to Table 4-6.
Introduction
Default Value
4-41