Allied Telesis SwitchBlade x3100 Series Manual page 410

Introduction
TABLE 4-13
Step Command
To destroy the instance the steps are to delete the VLAN(s) against the instance, and then destroy the instance.
>> show stp instance testmst
9
--- STP Information -----------------------------------------------
Spanning Tree Type...................... MSTP (MSTI)
Instance Name......................... testmst (10)
Instance State........................ ENABLED
(Output omitted)
Int Role State Cost Prio.Number Type
----- ---------- ---------- ---------- ----------- ------------------
1.0 DESIGNATED FORWARDING 2000 128.385 MSTP
8.1 DESIGNATED FORWARDING 200000 128.834 MSTP
---------------------------------------------------------------------
>> delete stp instance testmst vlan 10
Info (010017): Operation Successful
>> destroy stp instance testmst
Info (010017): Operation Successful
>> show stp
--- MSTP Configuration Identifier Information -----------------------
Format Selector................................ 0
Region Name.................................... region10
Revision Level................................. 10
-------------------------------------------------------------------
--- Spanning Tree Instance Summary --------------------------------
STP Instance
----------------- -------- --------------- ---------- ------------
MAIN
msttst
(testmst is not included)
---------------------------------------------------------------------
4-90
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration Procedure for MSTP
MSTID STP State
0 ENABLED
9 ENABLED
Description (Optional)
Root Port Vlan(s) Associated
N/A 1-5,7-10,20,30 (etc.)
N/A 6,420
Configuring MSTP