Allied Telesis SwitchBlade x3100 Series Manual page 195

Logging Procedures
ADD LOG FILTER OUTPUT
Syntax
ADD LOG FILTER={filterid-list|ALL} OUTPUT=outputid
Used to associate existing management log filters with an existing management log output
Description
destination. After successful execution of this command, the specified management log
output destination, if enabled, receives management logs that match the filter criteria
contained in the management log filters.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FILTER
OUTPUT
Example
ADD LOG FILTER=CRITICAL_log OUTPUT=TERMINAL
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
The log filter that was created.
The outputid that was created.
Introduction
Default Value
1-165