Snmp Command List - Allied Telesis SwitchBlade x3100 Series Manual

Configuring an SNMP Community

7.3.7 SNMP Command List

The following tables list the commands available to configure and manage SNMP on the SBx3112 switch.
TABLE 7-7
Commands
ADD SNMP COMMUNITY (SEC)
CREATE SNMP COMMUNITY (SEC)
DELETE SNMP COMMUNITY (SEC)
DESTROY SNMP COMMUNITY (SEC)
DISABLE SNMP (SEC)
DISABLE SNMP AUTHENTICATE_TRAP (SEC)
DISABLE SNMP COMMUNITY (SEC)
ENABLE SNMP (SEC)
ENABLE SNMP AUTHENTICATE_TRAP (SEC)
ENABLE SNMP COMMUNITY (SEC)
SET SNMP COMMUNITY (SEC)
SHOW SNMP (SEC)
SHOW SNMP COMMUNITY (SEC)
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
SNMP Commands
Introduction
7-55