Allied Telesis SwitchBlade x3100 Series Manual page 731

Configuring Local ARP Discard
DELETE MACFF GROUP HOST
Syntax
DELETE MACFF GROUP=groupname HOST={ ipaddress-list | ALL } INTER-
FACE={ type:id-range | id-range | ifname-list | ALL } [ FORCE ]
Indicates the specified host addresses on the specified interfaces are on longer associated
Description
with one Group. Note that hosts that are learned are not affected, and if a host address
has been learned statically and dynamically, only the static Host address is deleted. The
dynamically determined host address changes to type DYNAMIC.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
GROUP
HOST
INTERFACE
ALL
FORCE
Example
DELETE MACFF GROUP=A HOST=ALL INTERFACE=11.0
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
A name created for the group.
IP address(es) that will be deleted from the group.
The interface(s) that will be deleted from the group.
All interfaces that have statically configured hosts in the
Group are deleted from the Group.
Used to disregard a system warning that traffic could be
affected.
Introduction
Default Value
6-171