Allied Telesis SwitchBlade x3100 Series Manual page 677

Configuring Port Authentication
RESET DOT1X COUNTER
Syntax
RESET DOT1X COUNTER [ INTERFACE={ type:id-range | id-range |
ifname-list | ALL } ] [ SUPPLICANT={ macaddress-list | ALL } ] [
TYPE={ STATISTICS | DIAGNOSTICS | SESSIONSTATISTICS | ALL } ]
This command resets a supplicant's 802.1X-based Port Authentication counters/statistics.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
SUPPLI-
CANT
TYPE
Example
RESET DOT1X COUNTER
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The ethernet interfaces over which the Counters will be
reset.
Specifies a supplicant's MAC address or ALL supplicants.
The type of counters/statistics
STATISTICS
DIAGNOSTICS
SESSIONSTATISTICS
ALL
Introduction
Default Value
ALL
ALL
ALL
6-117