Allied Telesis SwitchBlade x3100 Series Manual page 865

Configuring BFD
ADD BFD INTERFACE
Syntax
ADD BFD INTERFACE={ type:id-range | id-range | ifname-list | ALL }
[ INTERVAL=1..60000 ] [ DETECTIONMULTIPLIER=2..255 ]
Adds the BFD feature to the selected interfaces.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
INTERVAL
DETEC-
TIONMULTI-
PLIER
Example
ADD BFD INTERFACE=
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The interface where BFD will be added.
Specifies the desired interval in milliseconds between
transmitted packets
The number of consecutive missed packets required to
declare a failure.
8.18,8.19
Introduction
Default Value
200ms
3
7-127