Allied Telesis SwitchBlade x3100 Series Manual page 669

Configuring Port Authentication
CLEAR DOT1X INTERFACE
Syntax
CLEAR DOT1X INTERFACE={ type:id-range | id-range | ifname-list |
ALL } [ SUPPLICANT={ macaddress-list | ALL } ]
This command initializes the 802.1X status of supplicants on the specified interface, and
Description
attempts reauthentication. Use this command to un-authorize an interface, and attempt
reauthentication on the specified interface.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
SUPPLI-
CANT
Example
CLEAR DOT1X INTERFACE
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The ethernet interfaces over which the 802.1X status
will be initialized.
Specifies a supplicant's MAC address or ALL supplicants.
=ETH:6.22
Introduction
Default Value
N/A
ALL
6-109