Allied Telesis SwitchBlade x3100 Series Manual page 144

Introduction
STOP TRANSFER
Syntax
STOP TRANSFER={ transferid-list | ALL }
Aborts an in-progress or pending file transfer. Only transfers to/from a network server
Description
can be stopped. File transfers from the CFC flash file system to a card in the shelf cannot
be stopped. Stopping a transfer that is in progress deletes the destination file, but does
not affect the source file.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
STOP TRANSFER ALL
1-114
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
TRANSFER The transfer ID(s), separated by a comma.
CFC Media (SD Card)
Default Value
ALL