Allied Telesis SwitchBlade x3100 Series Manual page 653

Configuring a TACACS+ Server
ENABLE TACPLUS SERVER (SEC)
Syntax
ENABLE TACPLUS SERVER={ ipaddress-list | hostname-list | ALL }
Used to enable one or more TACACS+ servers for use in user authentication requests.
Description
Once enabled, the TACACS+ server(s) are used for future user authentication requests.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
SERVER
Example
ENABLE
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The comma-separated ipaddress list or hostname list.
168.10.10.10
TACPLUS SERVER=
Introduction
Default Value
ALL
6-93