Rmon Ethernet Statistics - Allied Telesis SwitchBlade x3100 Series Manual

Introduction
The goal of Fault Management system is to produce alarms that notify the user that a component of the
•
system has a fault, and to repair the fault the component longer functions and so must be fixed/replaced.
Although the goals are different, the conditions that activate each system are the same, and are labeled defects,
a condition in which there is a limited interruption of the interface to perform its function.

7.5.1.2 RMON Ethernet Statistics

The SBx3112 module collects RMON statistics for Ethernet interfaces only. These are described in
TABLE 7-13
Statistic
etherStatsDropEvents
etherStatsOctets
etherStatsPkts
etherStatsBroadcastPkts
etherStatsMulticastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets (*)
etherStatsPkts65to127Octets (*)
etherStatsPkts128to255Octets (*)
etherStatsPkts256to511Octets (*)
etherStatsPkts512to1023Octets (*)
etherStatsPkts1024to1518Octets (*)
For the ports on the XE4 and GE cards, these statistics count both egress and ingress packets.
(*)
7-94
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
RMON Statistics for Ethernet Data
Description
Change alert setting for dropped packet events
Change alert settings for octets
Change alert setting for packets
Change alert setting for broadcast packets
Change alert setting for multicast packets
Change alert setting for CRC alignment errors
Change alert settings for undersize packets
Change alert setting for oversize packets
Change alert setting for fragmented packets
Change alert setting for jabbers
Change alert setting for packet collisions
Change alert settings for packets that are up to 64 octets long
Change alert settings for packets that are 65 to 127 octets long
Change alert settings for packets that are 128 to 255 octets long
Change alert settings for packets that are 256 to 511 octets long
Change alert settings for packets that are 512 to 1023 octets long
Change alert settings for packets that are 1024 to 1518 octets long
RMON Configuration
Table 7-13.