Allied Telesis SwitchBlade x3100 Series Manual page 333

Configuring the Forwarding Database
DISABLE SWITCH AGEINGTIMER
Syntax
DISABLE SWITCH AGEINGTIMER
Disables the ageing timer from ageing out dynamically learned entries in the Forwarding
Description
Database. The default setting for the ageing timer is enabled.
If the switch finds no matching entries in the Forwarding Database during the Forwarding
Process, then all switch interfaces in the VLAN/HVLAN will be flooded with the packet
(except the interface on which the packet was received).
Disabling the switch ageing timer is not recommended.
Note:
None
Options
Example
DISABLE SWITCH AGEINGTIMER
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Introduction
4-13