Allied Telesis SwitchBlade x3100 Series Manual page 911

Event Logging TRACE Commands
SETDEFAULTS TRACE
Syntax
SETDEFAULTS TRACE [ FORCE ]
Resets all the Event Logging settings to their default state. Logging is disabled and the
Description
buffer is reset to its original size (and cleared). This will also generate an Event Log so
that the user can see that logging was reset at this point.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FORCE
Example
SETDEFAULTS TRACE
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
Description
User Event Logging
Default Value
8-39