Allied Telesis SwitchBlade x3100 Series Manual page 824

Introduction
SET LLDP
Syntax
SET LLDP
[ TXINTERVAL=5..32768 ]
[ TXHOLD=2..10 ]
[ TXDELAY=1..8192 ]
[ REINITDELAY=1..10 ]
[ NOTIFYINTERVAL=5..3600 ]
Sets the global LLDP values
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SETT LLDP
7-86
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Option Description
LLDP value Refer to
NOTIFYINTERVAL
Table 7-9.
=3600
Configuring LLDP
Default Value