Configuring the Ingress Metering
DELETE TRAFFICDESCRIPTOR CLASSIFIER
Syntax
DELETE TRAFFICDESCRIPTOR={ tdname-list | ALL } CLASSIFIER={ classi-
fiername-list | ALL }
Removes the association of a TRAFFICDESCRIPTOR with one or more CLASSIFIERs.
Description
This removes this limit on the traffic that the system allows to be received through this
INTERFACE for the traffic flow identified by the CLASSIFIER.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
TRAFFICDE-
SCRIPTOR
CLASSIFIER
Example
DELETE TRAFFICDESCRIPTOR=large_rate CLASSIFIER=ALL
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The already created TRAFFICDESCRIPTOR(s), sepa-
rated by a comma
ALL - All already created TRAFFICDESCRIPTOR(s)
The name of the classifier(s), separated by a comma
Introduction
Default Value
6-55