Allied Telesis SwitchBlade x3100 Series Manual page 779

Configuring DHCP Relay
SET DHCPRELAY CIDORDER
Syntax
SET DHCPRELAY CIDORDER={ VIDFIRST | VIDLAST }
Controls for option 82 whether the VID will go at the beginning or end in sub-option 1.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
CIDORDER
Example
SET DHCPRELAY CIDORDER=VIDFIRST
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The order of the circuit ID (CID) used for IP address
assignment. This parameter is used when the DHCP
relay agent is in AUTO CIDFORMAT mode.
VIDFIRST - the DHCP relay agent sets the AUTO gen-
erated portion of the option 82 CID to
vid.slot.port.subif.
VIDLAST - the DHCP relay agent sets the AUTO gener-
ated portion of the option 82 CID to slot.port.subif.vid.
Introduction
Default Value
VIDLAST
7-41