Allied Telesis SwitchBlade x3100 Series Manual page 112

Introduction
SET SYSTEM
Syntax
SET SYSTEM [TIME=hh:mm:ss] [DATE=yyyy-mm-dd]
Sets various administrative global attributes. These attributes affect the overall system.
Description
All attributes can be displayed using the SHOW SYSTEM command. The SET SYSTEM
command sets the local time or date on the product.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SET SYSTEM TIME=08:30:00 DATE=2010-08-05
1-82
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
TIME Specifies the current local time of day. The format for
the time is hh:mm:ss, for example 08:30:00 for 8:30 AM
and 20:30:00 for 8:30 PM.
Note that the time set using this command is potentially
changed by enabling an SNTP server.
DATE Specifies the current date of the year. The format is
yyyy-mm-dd, for example 2010-01-01 for January 1,
2010.
Setting the system date is immediately reflected in all
system output that contains date, such as logs, SNMP
traps, etc.
Configuring SNTP
Default Value