Introduction
DESTROY CLASSIFIER
Syntax
DESTROY CLASSIFIER={classifiername-list|ALL}
Attempts to remove every specified CLASSIFIER from the system, and returns an error
Description
message for any that cannot be destroyed. This command is allowed only if no interfaces
are currently associated with the CLASSIFIER(s).
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
DESTROY CLASSIFIER=
6-26
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option
Description
CLASSIFIER
The name of the classifier(s), separated by a comma
delete all interface associations for the classi-
ALL -
fiers in one command.
ipfilt2
Configuring Classifiers
Default Value