Allied Telesis SwitchBlade x3100 Series Manual page 168

Introduction
Example
RESTORE CONFIG FILE D104_17JULY2010.CFG OUTPUT CONSOLE
1-138
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
OUTPUT Indicates the destination for the responses to the exe-
cuted commands:
CONSOLE - the output of the command execution is
displayed on the CLI console.
logfile (unit:logfile) - the filename of the log file to which
command execution output is saved during the restore
process. The maximum length of the filename is 100
characters.
Note: If the OUTPUT parameter is not provided, the
output from the commands are not recorded or dis-
played.
Creating a Text Configuration file
Default Value