Allied Telesis SwitchBlade x3100 Series Manual page 783

Configuring DHCP Relay
SHOW DHCPRELAY
Syntax
SHOW DHCPRELAY [ ={ dhcpname-list | MAIN | ALL } ] [ FULL ]
This command displays information about the DHCP Relay Agent for one or interfaces. If
Description
more than one interface is specified (or if no interface is specified) the following informa-
tion will be displayed, including the list of DHCP Servers, cumulative DHCP Relay Statis-
tics, and list of interfaces that are configured to run DHCP Relay.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
DHCPRELAY
FULL
Example
E135 - officer SEC>> SHOW DHCPRELAY
--- DHCP Agent Summary ------------------------------------------------------
DHCP Cumulative
Statistics
------------------ --
Discover.......... 0
Offer............. 0
Request........... 0
Decline........... 0
Ack............... 0
Nack.............. 1
Release........... 0
Inform............ 0
--------------------------------------
DHCP System-Wide
Settings
------------------ --------
CID Order......... VIDLAST
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
ALL - all DHCP instances
Full information is shown for the specified command
entered.
Introduction
Default Value
MAIN
Condensed
7-45