Allied Telesis SwitchBlade x3100 Series Manual page 606

Introduction
DESTROY ACCESSLIST
Syntax
DESTROY ACCESSLIST={ accesslistname-list | ALL } [ FORCE ]
Attempts to remove every specified ACCESSLIST from the system, and returns an error
Description
message for any that cannot be destroyed. By default this command is allowed only if no
interfaces are currently associated with the ACCESSLIST(s).
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
.
Example
DESTROY ACCESSLIST=metro
6-46
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option Description
ACCESSLIST The ACCESSLIST Name that already exists.
FORCE Using the FORCE option will override this behavior and
remove ACCESSLIST(s) from the interfaces before
destroying them. Otherwise, use DELETE ACCESSLIST
to delete the interface associations.
Configuring ACL
Default Value