Allied Telesis SwitchBlade x3100 Series Manual page 201

Logging Procedures
DESTROY LOG OUTPUT
Syntax
DESTROY LOG OUTPUT={outputid-list|ALL}
Removes existing management log output destinations from the system. CLI output desti-
Description
nations are automatically destroyed when the user logs out of his/her session. Upon suc-
cessful completion of this command, the specified management log destination is
completely removed from the system.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
OUTPUT
Example
DESTROY LOG OUTPUT=terminal
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
Introduction
Default Value
1-171