Allied Telesis SwitchBlade x3100 Series Manual page 757

Configuring DHCP Relay
TABLE 7-3
Step Command
create dhcprelay Ral agent remoteid
2
IFDESCRIPTION
Add snooping VLAN to the DHCP Relay instance
add dhcprelay Ral vlan 3200
3
Set operating mode of DHCP Relay instance to SNOOP
set dhcprelay Ral mode snoop
4
Review settings for new DHCP Relay instance
show dhcprelay Ral
5
--DHCP Agent Settings for instance: Ral
---------------------------------------------------------------------
Mode CID Format
----- ----------- ----------------- --------------
SNOOP AUTO
Interface Information
----------------------
(output omitted)
Add interfaces to the snooping VLAN
add vlan 3200 interface 0.21 frame
6
untagged
add vlan 3200 interface 0.20 frame
untagged
Configure the network interface
set interface 0.20 ge direction network
7
View snooping information on interfaces
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Configuration Procedure for DHCP Relay Snooping
Shelf ID
EC:CD:6D:03:10:CB
Description/Notes
Creates a DHCP Relay instance named "Ral"
whose remote ID is set to the Interface
Description.
Associates the snooping VLAN with the DHCP
Relay instance
Puts the DHCP Relay instance in Snoop mode
Remote ID Servers
--------
IFDESCRIPTION
Adds customer interface 0.21 to the snooping
VLAN
Adds network interface 0.20 to the snooping
VLAN
Sets interface 0.20 to the Network direction
Introduction
VLAN Vid list
------------
None 3200
7-19