Allied Telesis SwitchBlade x3100 Series Manual page 886

Introduction
SHOW INTERFACE ALARM SEVERITY
Syntax
SHOW INTERFACE [ ={ type:id-range | id-range | ifname-list | ALL }
] ALARM SEVERITY [ ={ NONE | INFO | MINOR | MAJOR | CRITICAL |
DEFAULT | NONDEFAULT | ALL } ]
Lists the interfaces and the alarm severities that are associated with them. If the severity
Description
is the default level, '(Default)' is shown next to the interface. These levels may be
changed because of the
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SHOW INTERFACE 0.23 ALARM SEVERITY=MAJOR
--- Interface Alarms Settings ---
Interface
------------ --------
0.23
8-14
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
SET INTERFACE ALARM SEVERITY
Option Description
INTERFACE The interfaces that will have their alarm severities dis-
played.
ALARM The alarm severity to display:
SEVERITY
NONE
INFO
MINOR
MAJOR
CRITICAL
DEFAULT
NONDEFAULT
ALL
Severity
Major (default)
Configurable Alarm Severity (Interface Alarm)
command.
Default Value
ALL