Allied Telesis SwitchBlade x3100 Series Manual page 842

Introduction
RESET INTERFACE COUNTER
Syntax
RESET INTERFACE={ type: | type:id-range | id-range | ifname-list |
ALL } COUNTER [ FORCE ]
The RESET INTERFACE COUNTER command resets the current statistical counts to
Description
zero. The reset affects all statistics associated with the provided interface or interfaces.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
RESET INTERFACE=
7-104
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Option Description
INTERFACE A logical representation of one or more physical ports;
the INTERFACE for which RMON data is enabled
type:id-range - the type of available ports, such as
ETH:7.0 or a range (ETH:8.0-8.9)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL - used to specify the same historical data collection
parameters on all applicable interfaces in the system
COUNTER The number of times a counter increments on the inter-
face for a statistic.
FORCE - overrides the CLI command confirmation
behavior
ALL
Configuring RMON Ethernet Statistics
Default Value