Allied Telesis SwitchBlade x3100 Series Manual page 596

Introduction
TABLE 6-5
Step Command
ADD ACCESSLIST stb_range
4
SHOW ACCESSLIST stb_range
--- Access Lists ---------------------------------------------------------
Name
--------- -------------- ---- ------- ------------------------------- ---
stb_range
Deprovision the ACCESSLIST
DELETE the ACCESSLIST from interface or set of interfaces
DELETE ACCESSLIST stb_range
5
DESTROY the ACCESSLIST
DESTROY ACCESSLIST=stb_range
6
Destroy Access List(s) (Y/N)? Y
SHOW ACCESSLIST=stb_range
Error (041154): Access List(s) "stb_range" do not exist.
a. To ensure that only ARP packets from the permitted IP addresses were allowed to pass, the ARP Filtering feature
would be used, as described in 6.11.1.
6-36
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Configuration Procedure for ACL (Continued)
INTERFACE=eth:10.0
Interfaces
ETH:[10.0] 1
INTERFACE=eth:10.$
Description (Optional)
Rule Action Fields
DENY APPLICATION=NETBIOS
2 PERMIT IPSOURCE=172.16.5.0
SOURCEMASK=255.255.255.240
3 PERMIT PROTOCOL=2054
-- DENY
Configuring ACL