Allied Telesis SwitchBlade x3100 Series Manual page 589

Configuring Classifiers
SETDEFAULTS CLASSIFIER
Syntax
SETDEFAULTS CLASSIFIER=classifiername [ VID ] [ VPRIORITY ] [
INNERVID ] [ INNERVPRIORITY ] [ ETHFORMAT ] [ LSAP ] [ IPDEST ] [
IPSOURCE ] [ IPDSCP ] [ IPPROTOCOL ] [ IPTOS ] [ MACDEST ] [ MAC-
SOURCE ] [ PROTOCOL ] [ TCPPORTDEST ] [ TCPPORTSOURCE ] [ TCPFLAGS
] [ UDPPORTDEST ] [ UDPPORTSOURCE ]
Clears the specified user defined match rule (or rules) from the CLASSIFIER. The previ-
Description
ous user defined match rule match rule may still exist on the CLASSIFIER as a derived
rule if it is required by any of the remaining match rules. For example, if the match rules
TCPPORTDEST=45 and IPPROTOCOL= TCP exist on a classifier then clearing IPPRO-
TOCOL will result in that rule being removed as a user defined rule and added back as a
derived rule. This command does not remove association of the CLASSIFIER to
ACTION(s) or INTERFACE(s).
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
TRAFFICDE-
SCRIPTOR
Example
SETDEFAULTS CLASSIFIER=ipfilter3
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The name(s) of the already created TRAFFICDESCRIP-
TOR(s), separated by a comma.
Introduction
Default Value
6-29