Allied Telesis SwitchBlade x3100 Series Manual page 576

Introduction
officer SEC>> show class all int 3.4 full
--- Classifier Configuration Data ---------------------------------------------
Interface Rank Name
--------- ---- ------------ ---------------------------------------- ---------
ETH:3.4 51 ips1 (NORES)
52 ips2 (NORES)
53 ips3 (NORES)
54 ips4 (NORES)
55 ips5 (NORES)
56 ips6 (NORES)
57 ips7 (NORES)
58 ips8 (NORES)
59 ips9 (NORES)
60 ips10
(NORES)
61 ips11
(NORES)
62 ips12
(NORES)
63 ips13
(NORES)
68 ipdrop
(NORES)
-------------------------------------------------------------------------------
officer SEC>> show alarm card 3
--- Interface(Port) Alarms ---
Interface Fault
------------ -------------------------------- --------
3.4 Classifier Resource Failed
6.3.2.9 Error (ERR)
This error would occur in the instance of a software error. This would be different from a NOSPT or NORES.
In the example below, the user has added three classifiers to a port and attempts to add a fourth. An error
appears saying the card cannot accept the fourth classifier because the number of masks supported by the card
has been exceeded. As a result, when the user displays the classifiers for the port a No Resources error
appears next to the classifier. The user can delete the fourth classifier and the (ERR) is removed from the dis-
play.
officer SEC> ADD CLASSIFIER=ip1 PORT=11.0 PRECEDENCE=51
Info (010017): Operation Successful
P
officer SEC> ADD CLASSIFIER=ip2 PORT=11.0 PRECEDENCE= 52
Info (010017): Operation Successful
officer SEC> ADD CLASSIFIER=ip3 PORT=11.0 PRECEDENCE= 53
Info (010017): Operation Successful
officer SEC> ADD CLASSIFIER=ip4 PORT=11.0 PRECEDENCE= 54
Info (010017): Operation Successful
officer SEC> SHOW CLASSIFIER=ALL PORT=11.0
--- Classifier Configuration Data ---------------------------------------------
Port Rank Name
---- ---- ---------------- --------------------------------- -----------------
11.0 51 ip1 (ERR)
52 ip2 (ERR)
53 ip3 (ERR)
54 ip4 (ERR)
145 telesyn_default_ IPDEST=MULTICAST
video (ERR)
-------------------------------------------------------------------------------
6-16
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Field Match(es)
IPSOURCE=10.10.10.1/32
IPSOURCE=10.10.10.2/32
IPSOURCE=10.10.10.3/32
IPSOURCE=10.10.10.4/32
IPSOURCE=10.10.10.5/32
IPSOURCE=10.10.10.6/32
IPSOURCE=10.10.10.7/32
IPSOURCE=10.10.10.8/32
IPSOURCE=10.10.10.9/32
IPSOURCE=10.10.10.10/32
IPSOURCE=10.10.10.11/32
IPSOURCE=10.10.10.12/32
IPSOURCE=10.10.10.13/32
PROTOCOL=IPV4
Severity
Minor
Field Match(es)
IPSOURCE=1.1.1.1/1
IPSOURCE=1.1.1.1/2
IPSOURCE=1.1.1.1/3
IPSOURCE=1.1.1.1/4
Classifier Management
Action(s)
DROP
COUNT
Time Stamp
--------------
03:17:56 08/04
Action(s)
SETVPRIORITY=1