Allied Telesis SwitchBlade x3100 Series Manual page 546

Introduction
ADD TRACE IGMPSNOOPING MESSAGETYPE
Syntax
ADD TRACE IGMPSNOOPING MESSAGETYPE={ REPORTV1 | REPORTV2 | LEAVE |
GENERALQUERY | LASTMEMBERQUERY | ALL } [ INTERFACE={ type:id-range
| id-range | ifname-list | ALL } ] [ MACADDRESS={ macaddress | ALL
} ] [ GROUPADDRESS={ ipaddress | ALL } ]
This command adds trace criteria. The parameters, when specified together in a single
Description
command, are taken to be AND'ed together. Multiple invocations of this command are
OR'ed. If parameters are not specified, ALL is assumed.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
MESSAGE-
TYPE
INTERFACE
MACAD-
DRESS
GROUPAD-
DRESS
Example
ADD TRACE IGMPSNOOPING MESSAGETYPE=LEAVE INTERFACE=1.23
5-14
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
Description
The interface from which the MAC address was learned
The MAC address as learned from the source address
field of a frame, or entered as part of a static filter entry.
Example: 00:0C:25:00:13:8C
The IP address of the multicast group
ALL - All IP addresses of the multicast groups
Configuring IGMP
Default Value
ALL
ALL
ALL
ALL