Allied Telesis SwitchBlade x3100 Series Manual page 551

Configuring IGMP
ENABLE IGMPSNOOPING
Syntax
ENABLE IGMPSNOOPING [ INTERFACE={ type:id-range | id-range |
ifname-list | ALL } ]
The ENABLE IGMPSNOOPING command is used to enable the snooping for the inter-
Description
cept and monitoring of the IGMP protocol messages that setup the layer 2 multicast
group information in the forwarding database.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
ALL
Example
ENABLE IGMPSNOOPING
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management Pro-
tocol (IGMP))
Description
Enable all interfaces
INTERFACE=1.23
Introduction
Default Value
5-19