Allied Telesis SwitchBlade x3100 Series Manual page 826

Introduction
SETDEFAULTS LLDP
Syntax
SETDEFAULTS LLDP [ TXINTERVAL ] [ TXHOLD ] [ TXDELAY ] [ REINITDE-
LAY ] [ NOTIFYINTERVAL ]
Sets the defaults for the global LLDP values. This command would be used to change
Description
back to the default values that had been changed by the SET LLDP command.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SETDEFAULTS LLDP
7-88
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Option Description
LLDP value Refer to Table 7-9.
Configuring LLDP
Default Value