Allied Telesis SwitchBlade x3100 Series Manual page 522

Introduction
SET HVLAN INTERFACE
Syntax
SET HVLAN={ hvlanname | vid } INTERFACE={ type:id-range | id-range
| ifname-list | ALL } [ FRAME={ UNTAGGED | TAGGED } ]
Toggles the status of interfaces in a Hierarchical VLAN (HVLAN) between tagged and
Description
untagged.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SET HVLAN=S_200 INTERFACE=0.23 FRAME=TAGGED
4-202
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Option Description
HVLAN The provisioned HVLAN name, or the HVLAN ID.
INTERFACE The interface where the HVLAN FRAME setting is being
changed.
FRAME TAGGED - the frames are transmitted with a VLAN tag.
UNTAGGED - the frame is transmitted without a VLAN
tag.
Configuring VLAN Based HVLAN
Default Value
N/A
N/A
UNTAGGED