Allied Telesis SwitchBlade x3100 Series Manual page 797

Configuring an SNMP Community
DESTROY SNMP COMMUNITY (SEC)
Syntax
DESTROY SNMP COMMUNITY=name
The DESTROY SNMP COMMINUTY command destroys an existing SNMP community
Description
from the system and all of the trap hosts and managers that are associated with it. The
COMMUNITY parameter specifies the SNMP community. The community must exist in
order to destroy it.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
COMMU-
NITY
Example
DESTROY SNMP COMMUNITY=system_test
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
name - the name of the SNMP community; a case-sensi-
tive alphanumeric string of 1 to 15 characters.
Introduction
Default Value
7-59