Physical Interface Configuration; Configuring The Management Interfaces - Allied Telesis SwitchBlade x3100 Series Manual

Physical Interface Configuration

1.6.3 Physical Interface Configuration
SBx31CFC
SYS S TA TUS
MASTER
M/S
SL AVE
NORMAL
PSU
FAULT
NORMAL
FAN
FAULT
RESET
REA DY
Management software,
PC with *TELNET/CLI,
Network Management System
SBx31XZ4
FIGURE 1-4
To enable TELNET access for the management ethernet interfaces, TELNET must be enabled. The user can
then choose which interface to use and supply the IPADDRESS and SUBNETMASK for the SBx3112 that will be
used by the management device when a user logs in

1.6.4 Configuring the Management Interfaces

1.6.4.1 Configuration Procedure
The following tables show how to configure the MGMT and Inband interface.
Caution: Enabling the Inband Interface would disable the MGMT interface.
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SBx S TATUS
0 1
2 3
4 5 CFC
NET MGMT
6 7
M/S
8 9
PSU
FAN 10 11
SD
L/A
10/100/1000Base-T
B USY FAULT
Ethernet
0
XFP
Connections for Management Interfaces for the SBx3112
1000 LINK AC T
10/100 LINK AC T
CONSOLE
RS-232
Ethernet (Dedicated for Management)
PORT ACTIVITY
10G LINK / AC T
1 2
XFP XFP
Introduction
Management software,
PC with *TELNET/CLI,
Network Management System
3
XFP
1-57