Allied Telesis SwitchBlade x3100 Series Manual page 530

Introduction
TABLE 4-32
Step Command
Set the translation option on interface 3.1
SET VLAN=200 INTERFACE=3.1 TRANS-
10
LATE=10
Systems B, C, and D could also be provisioned for the translation configuration as long as the
Note:
translated VLANs (100 and 200) applied to customer A and B. Also, VLAN 10 could not be associated
with the SM interfaces that use translation.
TABLE 4-33
Step Command
set the translation option on SM port 2.0 to NONE
On System A,
SET VLAN=100 INTERFACE=2.0
1
TRANSLATE=NONE
Set the translation option on SM port 2.1 to NONE
SET VLAN=200 INTERFACE=2.1
2
TRANSLATE=NONE
Destroy the associations between the translated VLANs and their interfaces
3
Set the translation option on interface 2.1
SET VLAN=200 INTERFACE=2.1 TRANSLATE=10
4
Destroy the two VLANs
5
4-210
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration procedure for VLAN Translation
Procedure to Deprovision VLAN Translation
Configuring VLAN Translation
Description
Translate the Customer B VLAN ID 10 to 100.
Description
Translate the Customer B VLAN ID 10 to 200.