Allied Telesis SwitchBlade x3100 Series Manual page 547

Configuring IGMP
DELETE IGMPSNOOPING INTERFACE MACADDRESS
Syntax
DELETE IGMPSNOOPING INTERFACE={ type:id-range | id-range | ifname-
list | ALL } MACADDRESS={ macaddress-list | partial-macaddress-list
| ALL } [ FORCE ]
Used to delete either some or all of the set-top box (STB) MAC addresses that have
Description
been configured for a given interface.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
MAC
Address
Example
DELETE IGMPSNOOPING INTERFACE=
00:0C:25:00:13:8C
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management Pro-
tocol (IGMP))
Description
The interface from which the MAC address was learned
The MAC address as learned from the source address
field of a frame, or entered as part of a static filter entry.
Example: 00:0C:25:00:13:8C
1.23 MACADDRESS=
Introduction
Default Value
5-15