Configuring DHCP Relay
SHOW DHCPRELAY INTERFACE
Syntax
SHOW DHCPRELAY INTERFACE [ ={ type:id-range | id-range | ifname-
list | ALL } ] [ FULL ]
Displays information about the DHCP Relay Agent for one or more interfaces. The infor-
Description
mation includes the list of DHCP Servers as well as a list of interfaces that are configured
to run DHCP Relay.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
FULL
Example
E135 - officer SEC>> SHOW DHCPRELAY INTERFACE=1.23
--- DHCP Interface Status (detail) ----------------------------------------
DHCP Interface Settings (ALL instances)
--------------------------------------------------
Interface............................. 1.23
Filtering............................. OFF
Auto Age.............................. OFF
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
A logical representation of one or more physical ports;
the INTERFACE to enable DHCP Relay service on.
type:id-range - the type of available ports, such as ETH
or LAG
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL - all interfaces in the system
Full information is shown for the specified command
entered.
Introduction
Default Value
N/A
Statistics
---------------------
DHCP Packet
Count
------------ -----
Discover.... 0
Offer....... 0
Request..... 0
Decline..... 0
Ack......... 0
Nack........ 0
Release..... 0
Inform...... 0
7-43