Allied Telesis SwitchBlade x3100 Series Manual page 773

Configuring DHCP Relay
DISABLE DHCPRELAY INTERFACE
Syntax
DISABLE DHCPRELAY={ dhcpname-list | MAIN | ALL } INTERFACE={
type:id-range | id-range | ifname-list | ALL
The command DISABLE DHCPRELAY disables the specified DHCP relay function on the
Description
specified interfaces.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
DHCPRELAY
INTERFACE
Example
DISABLE DHCPRELAY=x3112 INTERFACE=ALL
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
ALL - all DHCP instances
A logical representation of one or more physical ports;
the INTERFACE to enable DHCP Relay service on.
type:id-range - the type of available ports, such as ETH
or LAG (optional)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL - all interfaces in the system
Introduction
Default Value
N/A
N/A
7-35