Allied Telesis SwitchBlade x3100 Series Manual page 199

Logging Procedures
DELETE LOG FILTER
Syntax
DELETE LOG FILTER={filterid-list|ALL} OUTPUT=outputid
Used to remove the association between management log filters and a management log
Description
output destination. Upon successful execution of this command, the specified manage-
ment log filters are removed from the management log output destination. The manage-
ment log output destination will no longer receive logs that match the filter criteria in the
log filters that were removed.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FILTER
OUTPUT
Example
DELETE LOG FILTER=rmon_filter OUTPUT=terminal
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
The name of a previously created filter to delete.
The name of the output destination. This was created
with the CREATE LOG FILTER command.
Introduction
Default Value
N/A
1-169