Allied Telesis SwitchBlade x3100 Series Manual page 518

Introduction
CREATE HVLAN
Syntax
CREATE HVLAN=[ hvlanname ] VID={ 2..4094 | vid-range } [ TYPE={
PORTTUNNEL | VLANTUNNEL } ]
Creates a Hierarchical Virtual LAN (HVLAN) entry with a unique name and identifier
Description
(VID). Once created, the HVLAN's VID cannot be changed. The HVLAN must first be
removed with the DESTROY HVLAN command and then created again. When an
HVLAN entry is created, it is assigned to the default STP. A maximum of 4093 HVLANS/
VLANS can be created with any VID in the range 2 to 4094.
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
CREATE HVLAN=S_300 VID=300 TYPE=VLANTUNNEL
4-198
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Option Description
HVLAN The name for this HVLAN.
VID
The VLAN id or range of vids.
HVLANs can be created with any VID in the range
2 to 4094
TYPE PORTTUNNEL - Port-based HVLAN
VLANTUNNEL - VLAN-based HVLAN
Configuring VLAN Based HVLAN
A maximum of 4093
.
Default Value
vlan{VID},
e.g., vlan3000
N/A
PORTTUNNEL