Allied Telesis SwitchBlade x3100 Series Manual page 521

Configuring VLAN Based HVLAN
DESTROY HVLAN
Syntax
DESTROY HVLAN={ hvlanname-list | vid-range | ALL }
Destroys the specified Hierarchical VLAN (HVLAN) or all HVLANs. An HVLAN cannot
Description
be destroyed if interfaces are associated with it.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
HVLAN
Example
DESTROY HVLAN=S_200,S_300
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The list of provisioned HVLAN names, separated by a
comma, or the range of HVLAN IDs.
ALL - all HVLANs are destroyed.
Introduction
Default Value
N/A
4-201