Allied Telesis SwitchBlade x3100 Series Manual page 311

Configuration Guidelines
DISABLE POE INTERFACE
Syntax
DISABLE POE INTERFACE={ type:id-range | id-range | ifname-list |
ALL }
Disables the POE interface. This is independent of the interface's administrative state,
Description
meaning that a port with PoE disabled could still be UP-UP and passing traffic.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
Example
DISABLE POE INTERFACE 1.23
Service may be affected, are you sure (Y/N)? y
Info (020185): Successfully disabled interface(s) ETH:[1.23]
Software Reference for SwitchBlade x3100 Series Switches (Power over Ethernet (PoE))
Description
A logical representation of one or more physical ports
type:id-range - the type of available ports, such as
ETH:7.0 or a range (ETH:8.0-8.9)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL - all applicable interfaces in the system
Configuring the GE24POE Card
Default Value
3-9